Oil Rubbed Bronze

Black

Heavy Bronze

Pewter

Brushed Silver

FINISH

• We use automotive paint to coat our doors.
• Galvanize spray is used to help provide greater protection against corrosion for the iron base.  Primer and automotive paint is applied after the galvanizing spray process.

COATING THICKNESS

• Spray Primer Thickness - Around 180 microns
• Paint Color Thickness - Around 30 microns
• Clear Coat Thickness - Around 30 microns

• Because all of our products are hand made and painted, color may differ a little from the photo. This ensures each order is one of a kind.

Pinky's Iron Doors Dream design features a carefully crafted scrollwork that provides an immediate touch of sophistication to any home. Combined with the ornate organic motifs that break up the linearity of the wrought iron arch double doors, the decorative accents lend a whimsical atmosphere to the entrance. Structurally, this door provides a tempered, dual-panel 5/8" glass pane that is hinged for ease of access. This glass element adds a security layer while also enabling effortless cleaning and climate control.

The Dream is fabricated with industry above standard 12 gauge material. The doors are 2" inches thick, include a steel threshold, and bullet hinges with grease fittings welded on the frame. To allow for easy installation, we have tabs with pre drilled holes welded on the jamb. In order to produce an energy efficient product for our customers our 5/8" tempered dual pane operable glass designs encompass dual sealing which helps reduce both heat and air leakage. Additionally, we include Polyurethane dual foam weather stripping inside each frame, helping reduce hot and cold weather transfer. To help prevent infiltration of sound, light, drafts, insects, moisture, smoke or fire a door sweep is included, and installed at the bottom of your door to help seal gaps.

COATING THICKNESS

• Spray Primer Thickness - Around 180 microns
• Paint Color Thickness - Around 30 microns
• Clear Coat Thickness - Around 30 microns

Type

All Air series Thermally Broken doors have (SDL) simulated divided light glass with 3/4" mullions

JAMB

• Jamb is included and packaged separately from the door. 
• Jamb is constructed with 12 gauge tube (above industry standard).   

Polyurethane Foam Core is filled in the jamb for greater insulation. 

Threshold: Steel threshold is included and it comes welded on the jamb.

In Swing Threshold:

• Thickness or height from the back interior side:  1 1/8”
• Thickness or height from the front exterior side: 1/2”
• Width or Depth:  6” 

Out Swing Threshold:

• Thickness or height from the back interior side:  1 1/4”
• Thickness or height from the front exterior side: 1/2”
• Width or Depth:  6”

Nailing Fins:

ALL thermally broken doors have 3” nailing fin all around. Nailing fins come with predrilled holes to allow for easy installation.

Hinges: Steel weld on bullet hinges with grease fittings come welded on jamb and door.  Allows customers to comfortably open our doors, but yet feel that quality with each and every use.  We use welded steel bullet hinge with copper crush washer instead of a ball bearing hinge because ball bearings are made out of stainless steel (hard material) and the hinges/doors are made out of steel (softer material) which over time causes the hinge to wear. With copper crush washers, the washer is the soft point and they are easily replaceable over time if needed. 

THERMAL BREAK DOOR THICKNESS

• Our thermally broken doors are 1/8” thicker than our regular iron doors.
• Thermal Break Door Thickness: 2 1/8”
• In stock Jamb: 6”

HOW OUR PRODUCTS ARE MEASURED

Our sizes are measured from outside of jamb to the outside of the jamb. For example, a 72” x 96” door listed on our website means that 72” is the width from outside to outside of jamb (not the actual width size of the door) and 96” is the height from outside of jamb to bottom of our built in steel threshold (not the actual height of the door).

We recommend the rough opening of the WIDTH to be 1/2” to 1” wider than the door size ordered to give the installer enough room to comfortably position the jamb into place and have enough room to make sure the jamb is leveled.

We recommend the rough opening of the HEIGHT to be 1/2” to 1” wider than the door size ordered to give the installer enough room to comfortably position the jamb into place and have enough room to make sure the jamb is leveled.

ROUGH OPENING

Our sizes are measured from outside of jamb to the outside of the jamb. For example, a 72” x 96” iron door listed on our website means that 72” is the width from outside to outside of jamb (not the actual width size of the door) and 96” is the height from outside of jamb to bottom of our built in threshold (not the actual height of the door)

We recommend the rough opening of the WIDTH to be 1/2” to 1” wider than the door size ordered to give the installer enough room to comfortably position the jamb into place and have enough room to make sure the jamb is leveled.

We recommend the rough opening of the HEIGHT to be 1/2” to 1” wider than the door size ordered to give the installer enough room to comfortably position the jamb into place and have enough room to make sure the jamb is leveled.

PHOTOS OF THERMAL BREAK IN JAMB & DOOR

Everything You Need to Know About Door Swing Direction

Most people don’t think about which direction their door swings. Opening a door is second nature, with the swing only coming into play if you push or pull and the door doesn’t open.

But the swing is important if you need to buy a new door, lever, or hinge. If you don’t know your door’s swinging direction, you could end up making a wrong purchase.

Here, PINKYS explains the different types of door swing and how you can determine whether your door is right-handed or left-handed.

The Types of Door Swing

Before we get into how to determine a door's swing, we need to know the types of swing.

Standard Doors

There are usually four ways a standard door can swing:

• Left-hand inswing (LHI)
• Left-hand outswing (LHO)
• Right-hand inswing(RHI)
• Right-hand outswing (RHO)

There's also the possibility that your door has a 180-degree swing. That's common with internal doors, giving you the ability to push or pull the door to open it from either direction.

Pivot Doors

Pivot doors differ from standard doors in one crucial aspect:

They have hinges on the top and bottom instead of on one of the sides.

They still open and close similarly to standard doors. You just have a little extra work to do when determining the hinge location.

A pivot door's swing direction can be one of two options:

• Swing inside
• Swing outside

These doors can also swing at a 180-degree angle. But with pivot doors, that means the door can stand parallel to a wall when fully opened rather than swinging 90 degrees in either direction.

How to Determine Door Swing Direction

Now that you know the differences between the different types of doors, it's time to determine the swing.

Why do you need to know this?

If you have an inswing door, trying to install an outswing door in its frame won't get you very far. You'll have to change the hinges, making the installation more complicated.

Let's run through some steps to help you along.

Step 1 - Understand the Terminology

There are four key bits of jargon to understand when determining door swing:

You have an inswing door if you have to push the door to open it from the outside.

Outswing doors require you to pull them from the outside to open them.

If the door's hinges are on the left side, you have a left-handed door.

Check the door's right side. If you see hinges, you have a right-hand door.

Step 2 - Stand on the Outside of the Door When It's Closed

Start by standing on the outside of the door.

For an exterior door, this is the side facing the street. You go from the outside into the building.

For interior doors, think about which room you'd consider yourself to be entering. For example, you may enter the kitchen from the living room. Or, you may enter a bedroom from the hallway.

Step 3 - Check Whether It's an Inswing or Outswing Door

Open the door from the outside. If you had to pull the door open, you have an outswing door. If you push the door past its opening to get in the room, you have an outswing door.

Step 4 - Check the Hinges

There's another way to see if a door is inswing or outswing.

Look along the door frame for the hinges. If you can see them standing from the outside, you have an outswing door.

If you can't see them, the door opens inwards, meaning you have an inswing door. Note that some doors can have hidden hinges.

Step 5 - Check What Side of the Door the Hinges Are On

Checking the hinges is the easiest step.

You have a right-handed door if the hinges are on the right-hand side. If they're on the left, the door is left-handed. Door knobs don’t factor into this test, though you’ll usually find them on the opposite side of the hinges.

Step 6 - Conduct a Handedness Test

Now, you get into the weeds of the terminology. You're going to figure out how the swing and handedness combine to tell you what kind of door you have.

Start by standing outside and close the door. For example, those testing a bedroom door will stand in the hallway facing the door.

Turn your back to the hinges and grab the knob with whichever hand doesn't have to reach across your body to grab it.

Then, open the door.

When you're using your right hand and don't have to move out of the way to open the door, you have a right-handed inswing door.

What if you had to step back while opening the door with your right hand? That means you have a right-handed outswing door.

If you used your left hand and had to step back, you have a left-handed outswing door.

If you didn't have to move while using your left hand, you've got a left-handed inswing door.

Always double check because the simplest mistake in door handing can lead to you buying the wrong door.

Find the Correct Door

You need to know your door's swing direction if you're buying a new door. You'll also need to know it when buying door levers. Your door's swing tells you which door handing you need, which is the direction a traditional door lever has to point when installed.

With our roots dating back to 1978, PINKYS pulls inspiration from the stunning creative style of our Los Angeles home.

Our goal is simple.

Create stunning architectural elements that create amazing opportunities for our customers. With an iron door from PINKYS you get more than a door. You gain a view and a connection to the world beyond your doorstep.

At PINKYS, we offer iron interior doors and exterior doors for any door swing direction. Whether you're looking an in swing, out swing, or pivot door, we have options for you. We even offer doors that swing 180 degrees.

We also offer plenty of attractive door hardware, meaning you can find the perfect door latches or door knob for your door with PINKYS.