If you have a rough opening (no door or door frame installed), use a measuring tape to get the measurements of the height and the width. Your rough opening should be 1 inch larger than the door’s measurements (1 BIGGER THAN THE HEIGHT AND 1 BIGGER ON THE WIDTH) in order to account for leveling of the door and the frame. **IT IS VERY IMPORTANT THAT 1/2 INCH IS LEFT ON THE TOP AND EACH SIDE. Once you get your rough opening size, subtract 1 inch from the height and the width, and that will be your door size.
If you are measuring a door that already has another door frame in it’s place, you can either take off the upper door trim and measure from the edge of each stud, which will get you your rough opening size as outlined above, or you can measure from the inside of your door jamb to the other side and one from the floor to the top of the inside of your door jamb. Once you get those measurement, add an inch and ½ on each side and you’ll have your rough opening size. Subtract 1 inch from each measurement, and you’ll have your door size from us.
Glass size is gone over in “GLASS” section. Threshold and weatherstripping are also gone over in other areas.
Our doors are 2 inches thick and have a 2 & ¾ inch bore hole backsets for handles and locks, which means they can accommodate many standard locks.
Our doors and frames are handmade from steel and are fitted perfectly to the frame that they are sold with. Because of this, frames and doors are not interchangeable.
Door Material
Made with 12 gauge galvanized steel and 5 mm thick double paned tempered glass with true light divide, our doors are made with top notch materials and are held to a top notch standard.
Our lead times are always kept up to date on our site on any product’s page, however our in-stock items ship from our warehouse here in Los Angeles within 2-3 days.
Same-day and next-day pickup is available from our warehouse in Vernon, CA at no cost.
Can I get a size that is not listed here?
Yes! We’re happy to make a fully custom door for you in the exact size that you’re looking for. Visit our custom order page HERE or on our website and a specialist will reach out to you shortly.
Will PINKYS come and measure my doorway?
Unfortunately we do not do home visits, however we do have the information needed for you or a contractor to make the correct measurements needed.
Do I need a contractor to measure for me?
No, you do not, however some people are more comfortable having their contractor make the measurement. Please refer back the “How to measure” video or writing in the “Size” section if this informational pop-up.
Is this the size of the door, or the frame?
We measure the frame only because all of our doors come with the hand made frame that they were made to be hung on.
How big is the actual door if this is the measurement of the frame?
Our standard steel doors are 1 inch smaller on the height and 1 inch smaller on each side of the frame.
Is there an install guide for this?
Yes! We have video guides explaining each and every step of the process, as well as a full installation guide. The videos and the pdf will be provided to you with your door on easy to scan QR codes on our packaging.
How do I measure for my door?
If you have a rough opening (no door or door frame installed), use a measuring tape to get the measurements of the height and the width. Your rough opening should be 1 inch larger than the door’s measurements (1 BIGGER THAN THE HEIGHT AND 1 BIGGER ON THE WIDTH) in order to account for leveling of the door and the frame. **IT IS VERY IMPORTANT THAT 1/2 INCH IS LEFT ON THE TOP AND EACH SIDE. Once you get your rough opening size, subtract 1 inch from the height and the width, and that will be your door size.
Can I measure for a new door if I currently have one in place?
Yes. If you are measuring a door that already has another door frame in its place, you can either take off the upper door trim and measure from the edge of each stud, which will get you your rough opening size as outlined above, or you can measure from the inside of your door jamb to the other side and one from the floor to the top of the inside of your door jamb. Once you get those measurements, add an inch and ½ on each side and you’ll have your rough opening size. Subtract 1 inch from each measurement, and you’ll have your door size from us.
With these measurements, go to our sizes and round to the nearest one. If the closest measurement we offer requires you to round up to our size, you should be able to move forward. If you must round down to our size, consult a contract about the sizing.