*you must stick to whichever door swing type you order. Our doors are not reversible or interchangeable.
Double
(RHI) Right hand in swing: Facing the door, standing outside of the door, the handle of the active door will be on your left side, the hinges will be on the interior right side of the door and the door will swing towards the inside from left to right. When the door is at its open position, the door will be resting on the right interior side.
(LHI) Left hand in swing: Facing the door standing outside of the door, the handle will be on your right side, the hinges will be on the interior left side of the door and the door will swing towards the inside from right to left. When the door is at its open position, the door will be resting on the left interior side.
(RHO) Right hand out swing: Facing the door standing outside of the door, the handle will be on your left side, the hinges will be on the exterior right side of the door and the door will swing towards the outside from left to right. When the door is at its open position, the door will be resting on the right exterior side.
(LHO) Left hand out swing: Facing the door standing outside of the door, the handle will be on your right side, the hinges will be on the exterior left side of the door and the door will swing towards the outside from right to left. When the door is at its open position, the door will be resting on the left exterior side.
Swing Capacity: 180 degrees
These doors can open a full 180 degrees as long and the door frame and hinges are placed correctly in your rough opening. Please note, every project site is different and this is solely dependent on nothing on site blocking the opening space of the doors and sidelights and the installation method your installer chooses to install the product. Make sure your contractor knows that you’d like the doors to open 180 degrees before they install it. They must take into account the thickness of the finishings as well.
Operable glass is not offered on our AIR series doors, however our dutch doors may fulfill a similar desire for your door! If you’re looking for a more tradition operable glass, take a look at our iron doors here!
Our AIR series steel doors use steel bullet hinges that come pre-mounted to the doors and frames. These can not be removed or adjusted. One copper crush washer will need to be place on each bullet hinge before hanging each door.
On top of each hinge, you’ll see a Zerk fitting (a brass nipple) that makes greasing your door significantly easier. These fitting do not have caps and are meant to be uncovered.
Made with 12 gauge galvanized steel and 5 mm thick double paned tempered glass with true light divide, our doors are made with top notch materials and are held to a top notch standard.
Our doors and frames are handmade from steel and are fitted perfectly to the frame that they are sold with. Because of this, frames, doors, and sidelights are not interchangeable.
The copper crush washers that we use on all of our hinges help the steel to not deteriorate from constantly rubbing together.
In addition to the copper crush washer which will only need to be replaced once you see it getting significantly slimmer (usually every few years), these doors also must be greased every 12 months or so. If you hear your door squeaking before 12 months, it’s a good idea to grease them then.
Greasing the hinges is very easy. All you need is a standard grease gun and petroleum grease. Once your grease gun is loaded and primed, place the nozzle directly on top of the brass nipple and press straight down until you hear a click. Once you hear the click, keep the gun pressed down and pump the lever 1 to 2 times. If grease starts to seep out of any of the crack of the hinge before you finish the full two pumps, stop, whip off the grease and move on to the next hinge.
The glass and the metal should be cleaned with our “Iron Door Spray” on a regular basis to protect it from UV rays. This spray is specially made to leave a protective coating on your door while also cleaning it at the same time.
Do I need to use a different glass cleaner and metal cleaner separately?
No, our Iron Door Spray will seamlessly clean each surface of your doors and sidelights. This will both clean your doors and sidelights, and give a layer of protection from the sun.
Can I buy an inswinging door and then switch it?
No, you can not. These doors and sidelights have differences on the interior and exterior sides in order to ensure that your doors and sidelights all maintain a matching style and direction of beveling on their lites.
How long will it take for me to get my door once I purchase it?
The lead times are always kept up to date on our site on any product’s page, however our in stock items ship from our warehouse here in Los Angeles within 2-3 days.
Can I hang this door on a regular door frame in my house?
No, you can not hang our doors on other hinges. Our doors, sidelights, and frames are handmade to fit each other exactly. When you buy doors from us, they will come with their own frame for you to install.
Can I install it myself?
Yes, many people install our doors and other products themselves. We have many videos on our installation guide that outline each step of the process. We also have a very visually explanatory installation guide with diagrams and pictures.
How much do these doors weigh?
Roughly between 600-1300 pounds. Here’s our size chart:
61” x 81” = 620 LBS
62" x 84" = 745 LBS
65” x 81” = 760 LBS
71" x 95" = 855 LBS
72” x 81” = 810 LBS
72" x 120" = 1040 LBS
74" x 96" = 885 LBS
62” x 96” = 820 LBS
65” x 96” = 850 LBS
72” x 96” = 864 LBS
74” x 97.5” = 900 LBS
72” x 108” = 960 LBS
74” x 110” = 1,000 LBS
74” x 120” = 1,060 LBS
72” x 132” = 1,188 LBS
74” x 132” = 1,221 LBS
Do you install?
No, we do not, however most of our clients do not have trouble finding a contractor local to them.